Plate '1' smashes world record at $14.5m

This week-end at an auction in the United Arab Emirates the number 1 plate was sold for $14.5 million and the businessman who bought it said it was ready to go up to $30 million to buy it.

"Saeed Abdul Ghaffar Khouri, paid Dh52.2 million, more than double the current record, to become the proud new owner of Plate "1" — the ultimate car registration number," announced Abdulla Matar Al Mannaei, Managing Director of Emirates Auction, the official auctioneer for Code 5 distinguished number plate auctions, supported by the General Directorate of Abu Dhabi Police.

The earth-shattering price breaks Emirates Auction’s own record for the most expensive car license plate ever sold. Plate "5" sold for Dh25.2 million in May 2007 - almost 10 ten times the value of the luxury car it adorns. It was snapped up by Abu Dhabi businessman Talal Ali Mohammad Khouri.


"The expectations going in were huge. We were confident of delivering a positive outcome, but the final value exceeds our wildest hopes and dreams,’ Al Mannaei said.

"Today we set not just one, but two records, said Al Mannaei, adding that the auction - the sixth such even organized by Emirates Auction - attracted 750 participants, and generated a record Dh89 million (USD 24.25) from the sale of 90 number plates.

Along with "1," a total of 90 distinguished license plates were sold, including special numbers such as 96, 100, 212, 1111, 2001 and 31313.

Porsche recalling almost 19.000 Cayenne

Porsche is rearranging the fuel line in the engine compartment of 18,856 vehicles of the Cayenne model worldwide. This affects vehicles which were produced between November 30, 2006 and January 18, 2008.

There is the possibility with these vehicles that the slight movements of the engine when traveling could cause a fuel line to come in contact with the engine compartment cladding. This could cause a knocking sound and abrasion markings could occur on the fuel line itself. Up to now, there have been five known complaints worldwide, but only one instance in which any abrasion markings appeared on the fuel line. In order to avoid any further problems, Porsche is going to change the layout of the fuel line in the vehicles concerned.

Time in the workshop is about 40 minutes. For the customers, who will be advised of this shortly, the procedure is free of charge.

2009 Rolls Royce Phantom Coupe

Rolls Royce will unveil at the Geneva Motor Show the Coupe version of the luxury sedan Phantom. The Phantom Coupe version comes two years after the unveiling of the 101EX Concept unveiled in 2006. Production of the new Coupe will begin at Goodwood in the summer.


The Phantom Coupe is powered by a 6.75-litre V12 that produces 453 bhp, 720 Nm of torque and has segment-leading fuel economy. A 25 per cent increase in fuel capacity, compared to the Drophead Coupé, adds significant driving range. Agile, fast, long-legged and virtually silent, the Phantom Coupé allows both driver and passengers to emerge unruffled, even after an all-day run.


At the core of the Phantom Coupé is an advanced aluminium chassis, perhaps the single most significant component in delivering the marque’s legendary refinement. Lightweight and exceptionally strong, it impacts positively on ride comfort, handling and safety. Hand made, it requires over 130 meters of welding to create each body.

Press release

Rolls-Royce Motor Cars will unveil its new Phantom Coupé at the 78th International Geneva Motor Show on Tuesday, 4 March 2008. Production of the new car will start at Goodwood in the summer of 2008.

The Coupé is the most driver-orientated model in the Phantom line. A number of subtle but significant modifications have been made that change its character. It is noticeably more dynamic, whilst still offering incredible levels of comfort.

Marrying cutting-edge technology with a beautifully proportioned, muscular body that exudes power and style, it incorporates timeless Rolls-Royce design cues in an utterly contemporary manner.

Designed to cover great distances effortlessly, the Coupé is the perfect choice for a transcontinental trip. Power is provided by the Phantom’s 6.75-litre V12 that produces 453 bhp, 720 Nm of torque and has segment-leading fuel economy. A 25 per cent increase in fuel capacity, compared to the Drophead Coupé, adds significant driving range. Agile, fast, long-legged and virtually silent, the Phantom Coupé allows both driver and passengers to emerge unruffled, even after an all-day run.

Rolls-Royce Motor Cars Chief Designer, Ian Cameron, said “Rolls-Royce has always been about pace, performance and style. For the Coupé design we gave the quintessential Rolls-Royce design a dynamic twist. This adds a sense of drama to the outstanding engineering and drivability that are fundamentals of Rolls-Royce cars. The dynamic drive of the Phantom has always come as a surprise to customers and the Coupé takes it one step further.”



The Phantom Coupé features rear-hinged coach doors which add considerably to the ease of access to the rear lounge seats as well as to the overall aesthetics. Crucially, they aid the overall stiffness of the body as the rear hinged doors allow for an uninterrupted A-pillar helping to make this the most torsionally rigid Rolls-Royce ever. A brushed steel finish of A-pillar and bonnet, as seen for the first time on 100EX, is also available for the Coupé.

At the rear is a spacious picnic boot. A split tail compartment that opens in two parts, gives easy access to 395 litres of space. The lower tailgate also provides a comfortable seating platform for two adults when lowered.

At the core of the Phantom Coupé is an advanced aluminium chassis, perhaps the single most significant component in delivering the marque’s legendary refinement. Lightweight and exceptionally strong, it impacts positively on ride comfort, handling and safety. Hand made, it requires over 130 meters of welding to create each body.


Rolls-Royce Motor Cars Chairman and Chief Executive, Ian Robertson, said, “The Coupé has been designed and engineered to be the most dynamic interpretation of our values. Our 2007 sales figures illustrate how successful the entire model range has been with an increase of 25 per cent over the previous year.”

Audi R8 ( MSN Car of the Year )

The Audi R8 has bagged the MSN Cars Car of the Year award defeating rivals Ferrari 430 Scuderia and BMW M3 by a huge margin. The online poll was conducted on MSN’s U.K website and the R8 grabbed 42 percent of the casted 15,000 votes.

The contest is into its fourth year now with the BMW 3-Series Coupé, Bugatti Veyron and Aston Martin DB9 emerging winners on previous occasions. There were some surprises this year like the Merc C-Class which won the Wheels magazine car of the year award, came only 7th and the Fiat 500 which earlier won the European car of the year award, came at a disappointing 6th. The Jaguar XF saloon couldn’t contest and if it had, the R8 would have faced tough competition given the Brits love for Jags.

“When I first drove it(Audi R8) a couple of months ago I was blown away by its exhilarating, sure-footed handling, the grunt of its performance, and the fact that every second person on the road gave it a long hard stare as we hurtled by. A brilliant car that fully deserves to follow in the steps of cars like the DB9 and Veyron to be an ‘MSN Cars Car of the Year’,” said MSN Cars content manager Tom Evans.

The Audi R8 is aggressive, elegant and a remarkable feat of automotive engineering. It adds another element to Audi’s sprawling portfolio and adds another dimension to the supercar world.

Here are the entire results of the poll:

1. Audi R8 42%

2. Ferrari 430 Scuderia 13%

3. BMW M3 11%

4. Ford Mondeo 9%

5. Rolls-Royce Phantom DHC 7%

6. Fiat 500 6%

7. Mercedes-Benz C-Class 6%

8. Mini Clubman 2%

9. Mitsubishi i-car 2%

10. Mazda 2 1%

Pagani Zonda R

While we certainly cannot say the Zonda F lacks performance figures, driving around the Nürburgring in 7:32 and achieving lateral G forces of almost 1.5 G, it is however a road car, easy to drive, intuitive and setting the benchmark for comfort, safety and lightweight. Paired with a quality finish and the attention to detail this made the Zonda F one of the most desirable supercars resulting in the 25 Coupé models being sold out in record time.

This did not seem to fulfil the requirements of our most demanding customers, who adore the weekend drive on a racetrack.


The spark has been set by an Italo-American customer, enthusiast and already proud owner of 3 Zondas. He describes the project this way: "The thought has been on my mind for quite some time, but I am not interested in racing".

The Zonda R is born with full liberty. The target: the ultimate performance at the racetrack without any implications of rules, except for safety, where no compromise is allowed. In September 2006 the first drawings were ready, but it was crucial to have the support of Mercedes-AMG for a high revving engine with a power output of 750hp, dry sump, light and
with a low centre of gravity. The basis was the self supporting engine of the mighty CLK GTR, which has dominated the GT championships.

Eve at constant racing pace the engine would have to cover over 5.000 km before servicing. The challenge has been accepted without hesitation.

The Zonda R is a car designed from scratch, with only 10% of the Zonda F components to be carried over. The suspension forged in Avional, a new Pagani six speed transversal sequential gearbox, carbon fibre monocoque, aeronautical four pump fuel tank are only part of the equation.


The wheelbase has grown by 47mm, the overall length by 394 mm and the track is increased by 50mm. The bodywork and aerodynamics have been studied to offer maximum downforce. Even though built for the track, the project would not have received kick off, if the quality and finish of the car and its details was not up to the level of the Pagani road cars.

One of the first cars to be delivered however will be kept in a living room, designed by Pagani and built with the same materials as the Zonda F, beautifully textured carbon fibre, avional, titanium, inconel and other state of the art materials. Additionally it will feature a bespoke HiFi System that will allow the customer to listen to the sound of this car at Le Mans and the Nürburgring.

The Pagani customers who have ordered the Zonda R will be relieved of almost 1.2 million + taxes.


This Zonda is purpose made for track use, without restrictions of any competition rules or homologation, with the only exclusion of the passengers’ integrity, where no compromise is tolerated according to our philosophy and state-of-the-art safety measures are featured.

A new heart
The engine is built by the racing specialists at Mercedes AMG, where the championship winning DTM cars are born, as well as the CLK GTR, probably the most devastating and effective weapon ever to compete in the GT series. From it’s engine the Zonda R borrows the basic architecture including an ingenious dry sump allowing a low centre of gravity. This self-supporting engine with 750 hp at 8000 rpm and 710 Nm of torque carries a lightweight carbon fibre highperformance intake system, a racing multiple disc sintered clutch and Formula 1 style exhaust system, hydroformed in Inconel 625 and ceramic coated for optimal heat dissipation. The power unit combined with a 6 speed transversal manual sequential synchronised gearbox is designed to satisfy the most ambitious drivers.

The chassis
The central carbon chassis will incorporate a roll cage and a rubber racing fuel tank with 4 fuel pumps and quick refuel filler like on GT race cars. The wheelbase has been increased by 47mm to offer the best stability. The front and rear subframes are brand-new, built to accommodate a new suspension geometry, produced in avional. The magnesium forged rims with central wheel nut and a quick pneumatic lifting system allows fast and effortless changes of the slick tyres.


Bodywork and aerodynamics
The new bodywork has been honed to offer elevated downforce even in low speed corners. The longer front bonnet with flaps, closed underbody and the rear overhang with the adjustable rear wing and race derived diffusor translate into shattering aerodynamic efficiency and will let you experience cornering speeds beyond imagination.

The car displays and logs information about the amount of dowforce that the car is generating at each moment. Combined with the adjustable wings you can easily find the best setup for each track.

Workstation
The interior is designed to accommodate the driver and passenger in bespoke seats, built to offer the best support, when the G-forces from the vehicle dynamics come into question. The Digitek instrumentation provides the essential information and a sophisticated telemetry allows through a variety of sensors to monitor every single component of the car.

First Nissan hybrid system For Infiniti model

Nissan announced today that the company’s first hybrid system will be mounted mainly on its high-end Infiniti and other pricier rear-wheel-drive cars to make the gasoline-electric vehicles a profitable business. The first Nissan hybrid model will be launched by 2010.

"It’s easier to absorb the cost of the system with more expensive cars," Executive Vice President Mitsuhiko Yamashita told Reuters in an interview at the North American International Auto Show.

He added that fuel economy improvements from a hybrid rear-wheel-drive car would be pronounced because those cars generally get worse mileage than front-wheel-drive cars.

2009 Ford Kuga

Ford Europe will unveil at the Geneva Motor Show the 2009 Kuga, the first ever crossover designed and built by Ford in Europe. Kuga was first presented as the Iosis X Concept in 2006 at the Paris Motor Show and then as a prototype version at the 2007 Frankfurt Motor Show.


The new Ford Kuga is based unashamedly on Ford’s acclaimed C-car architecture – well proven in both the Ford Focus and the Ford C-MAX. Available with a proven powertrain and two series levels the full-time Haldex intelligent AWD system is complemented by a front-wheel-drive (FWD) version that is perfect for those drivers that are attracted by the style and presence of Kuga but do not require AWD capability.

The Ford Kuga is available in a choice of two distinct series levels with further options available that enable the driver to personalise the car exactly to their needs. The standard Electronic Stability Programme ( ESP) with combined Anti Rollover Mitigation (ARM), and ABS with Electronic Brakeforce Distribution (EBD) are just two of the significant driver assistance technologies of the new Kuga.


The Kuga will be made available with a 2.0-litre Duratorq TDCi 136 PS 100kW engine mated to a six-speed manual transmission. Applicable to both FWD and intelligent AWD derivatives the torque, performance and pulling power under all engine and vehicle load conditions have been perfectly calibrated to the new Ford Kuga. This engine provides high levels of torque – 320 Nm at 2,000rpm and 340 Nm in transient overboost. FWD and intelligent AWD variants return favourable fuel economy figures of 6.3 and 6.4 litres of fuel per 100 km respectively, using the combined fuel consumption figures. The intelligent AWD figure of 169 g/km of CO 2 is class-leading.


Press release



The all-new Ford Kuga is Ford of Europe’s first entry into the highly competitive crossover market and promises a blend of rewarding on-road driving quality and surprising off-road capability.

The genesis for Kuga was first seen in the dramatic iosis X Concept vehicle which made its debut at the 2006 Paris Motor Show. John Fleming, the company’s President and CEO confirmed that Ford of Europe would be developing a production vehicle inspired by the iosis X Concept for launch within two years.

At the 2007 Frankfurt Motor Show, Ford demonstrated that this commitment was soon to become reality with a preview of the production model. Signalling its significance as a new direction for Ford of Europe, the new model was given its own name; the Ford Kuga was born and destined to join the Ford of Europe model portfolio during the first half of 2008.

"With the new Ford Kuga we are keeping the promise we made at Paris in 2006, and delivering a highly capable, expressive and charismatic vehicle which will extend the Ford model range further," said John Fleming. "I firmly believe Kuga will appeal to many loyal Ford customers looking for something a bit different, but will also be capable of repeating the success of S- MAX in bringing new customers to the Ford brand. A distinctive ’kinetic design’ exterior, Ford’s acclaimed on-road vehicle dynamics and premium-like product quality are just some of the highlights Kuga will bring to this fast-growing market segment."


Sound Foundation
The new Ford Kuga is based unashamedly on Ford’s acclaimed C-car architecture – well proven in both the Ford Focus and the Ford C-MAX.

"We have an established portfolio to use as a basis and our shared technologies initiative within Ford Motor Company allows us even more possibilities to develop niche vehicles like Kuga," said Gunnar Herrmann, C-Car Vehicle Line Director, Ford of Europe.

Available with a proven powertrain and two series levels the full-time Haldex intelligent AWD system is complemented by a front-wheel-drive (FWD) version that is perfect for those drivers that are attracted by the style and presence of Kuga but do not require AWD capability. The Ford Kuga is available in a choice of two distinct series levels with further options available that enable the driver to personalise the car exactly to their needs. The standard Electronic Stability Programme ( ESP) with combined Anti Rollover Mitigation (ARM), and ABS with Electronic Brakeforce Distribution (EBD) are just two of the significant driver assistance technologies of the new Kuga.


Taking a New Direction
The stylish and charismatic Kuga is a further demonstration of the exciting new direction Ford of Europe’s products are taking. The fresh and modern styling is the starting point with the substance of the car matching this styling promise. This is delivered by leading driving dynamics, a strong and competent safety pedigree, high quality and craftsmanship and a competitive crossover package. A high seating position, the intelligent AWD option and large stowage volumes make the Kuga a very attractive proposition.

"Kuga’s arrival will raise the bar in the crossover segment," said Stephen Odell, Ford of Europe’s vice president for Marketing, Sales and Service. "Our ’kinetic design’ styling has given the car great personality and this gives it tremendous showroom appeal to potential customers."

A carefully selected palette of ten body colours is available for Kuga. A specially developed and brand new metallic colour – Chill – is available for both Kuga series options and drive choices. As a reflection of its iosis X Concept roots the production Kuga is available in two shades of white; solid Frozen White and a brand new metallic Electric White. This colour was first seen on the iosis X Concept car and the pre-production Kuga shown at Frankfurt. The Kuga is the first Ford of Europe production model to use Electric White which uses a specialised application method.

The exterior design features of Kuga naturally incorporate a wealth of practicality that provides much more than first meets the eye. The ’liftgate in liftgate’ tailgate offers maximum flexibility and convenience with separate access via micro switches to either the upper tailgate section only or both sections simultaneously.

The materials chosen for Kuga’s interior also demonstrate the close links to the iosis X Concept. The eye-catching and lavish Kuga interior incorporates fine leathers and gloss finishes on key areas that were first seen on the iosis X Concept car in piano white but now have a choice of shades depending on the series chosen. Colour-matched details of the interior design and integrated trim colours highlight the instrument panel and door trims, creating a complete, unified look of design-led quality and premium sportiness.

Kuga offers comfortable and spacious seating for up to five adults. The second row seating has a 60/40 split and has been designed to fold completely flat to maximise the usefulness of the available load compartment in two-seat mode. Underseat storage is a practical feature beneath the second row with further storage under the floor of the luggage compartment area which is divided into compartments to offer maximum practicality.

A luggage compartment sill height of 758mm aids the loading of heavy items into the car. The Kuga has a generous luggage capacity of 1355 litres when in two-seat mode, while the enclosed luggage compartment achieves a volume of 360 litres.

The Kuga offers customers two distinct series; Trend and Titanium. These have been developed to provide a clear customer choice of a well-equipped cool and colourful series – the Trend – and the modern, techno premium-feel Titanium.

Trend and Titanium series offer customers a wide range of equipment, technology and styling options. They also provide a strong platform for further personalisation and items to tailor the car exactly to each customer’s needs. These needs are further-enhanced and satisfied by the provision of dedicated Packs which provide additional protection, transport, stowage, styling and aftersales products.

The Ford Kuga features some technologies first showcased on Ford’s large and luxury segment – and more recently seen on the new generation Ford Focus – while also bringing new features to the segment and the Ford of Europe portfolio for the first time, such as a ’liftgate in liftgate’ tailgate.


Capability and Performance
The Kuga will be made available with a 2.0-litre Duratorq TDCi 136 PS 100kW engine mated to a six-speed manual transmission. Applicable to both FWD and intelligent AWD derivatives the torque, performance and pulling power under all engine and vehicle load conditions have been perfectly calibrated to the new Ford Kuga. This engine provides high levels of torque – 320 Nm at 2,000rpm and 340 Nm in transient overboost. FWD and intelligent AWD variants return favourable fuel economy figures of 6.3 and 6.4 litres of fuel per 100 km respectively, using the combined fuel consumption figures. The intelligent AWD figure of 169 g/km of CO 2 is class-leading.

"Kuga has a ’can-do’ attitude and ’go-anywhere’ ability and the powertrain perfectly plays its part." Said Herrmann.

The Ford Kuga has been engineered for class-leading on-road driving dynamics and exceptional off-road capabilities for expanded leisure time use.

Using proven and established Ford C-car chassis components and technology as a solid basis, Ford’s engineers tailored, tuned and calibrated each component and aspect of the ride and handling to ensure Kuga carries the blue oval family pedigree for strong driving dynamics.

The key overall target was to ensure that Kuga achieved the highest levels of ride, handling, braking and steering performance within the segment. The all-new Kuga uses many new systems and components in order to achieve the programme’s targets.

The Ford Kuga joins a highly acclaimed and successful portfolio that is recognised for its safety standards as being a key attribute. The first element contributing to Kuga’s safety is the stiff and rigid passenger cell designed and built to resist deformation. A host of active, passive and dedicated pedestrian safety features further contribute to Kuga’s safety story. Integrated electronic systems including Trailer Stability Assist (TSA) add to the Kuga’s safety and instil driver confidence.

"We put a lot of resources into making our cars as safe as possible for our customers and all other road users," adds Herrmann. "We employ a whole-vehicle holistic and no-compromise approach."
Manufactured at Ford’s Saarlouis plant in Germany the new Kuga will be built alongside the new Focus three-door, five-door and wagon variants and C- MAX.